Introduction to PopED

Andrew Hooker

PopED computes optimal experimental designs for both population and individual studies based on nonlinear mixed-effect models. Often this is based on a computation of the Fisher Information Matrix (FIM).

To get started you need to define

There are a number of functions to help you with these tasks. See ?poped for more information.

Below is an example to introduce the package. Several other examples are available as r-scripts in the “examples” folder in the PopED installation directory located at:

system.file("examples", package="PopED")

You can view a list of the example files using the commands:

ex_dir <- system.file("examples", package="PopED")
list.files(ex_dir)

You can then open one of the examples (for example, ex.1.a.PK.1.comp.oral.md.intro.R, is very similar to the code found in this vignette) using the following code

file_name <- "ex.1.a.PK.1.comp.oral.md.intro.R"
ex_file <- system.file("examples",file_name,package="PopED")
file.copy(ex_file,tempdir(),overwrite = T)
file.edit(file.path(tempdir(),file_name))

In addition, there is another vignette called “Examples” that explores the new features in each example.

Define a model

Here we define a one-compartment pharmacokinetic model with linear absorption using an analytical solution. In this case the solution is applicable for both multiple and single dosing. Note that this function is also predefined in PopED as ff.PK.1.comp.oral.md.CL (see ?ff.PK.1.comp.oral.md.CL for more information).

library(PopED)
packageVersion("PopED")
#> [1] '0.7.0'
ff <- function(model_switch,xt,parameters,poped.db){
  with(as.list(parameters),{
    N = floor(xt/TAU)+1
    f=(DOSE*Favail/V)*(KA/(KA - CL/V)) * 
      (exp(-CL/V * (xt - (N - 1) * TAU)) * (1 - exp(-N * CL/V * TAU))/(1 - exp(-CL/V * TAU)) - 
         exp(-KA * (xt - (N - 1) * TAU)) * (1 - exp(-N * KA * TAU))/(1 - exp(-KA * TAU)))  
    return(list( f=f,poped.db=poped.db))
  })
}

Next we define the parameters of this function, in this case the between-subject variability (BSV) for each parameter is log-normally distributed (parameter Favail is assumed not to have BSV). DOSE and TAU are defined as covariates (in vector a) so that we can optimize their values later.

sfg <- function(x,a,bpop,b,bocc){
  parameters=c( V=bpop[1]*exp(b[1]),
                KA=bpop[2]*exp(b[2]),
                CL=bpop[3]*exp(b[3]),
                Favail=bpop[4],
                DOSE=a[1],
                TAU=a[2])
}

Now we define the residual unexplained variability (RUV) function, in this case the RUV has both an additive and proportional component.

feps <- function(model_switch,xt,parameters,epsi,poped.db){
  returnArgs <- ff(model_switch,xt,parameters,poped.db) 
  f <- returnArgs[[1]]
  poped.db <- returnArgs[[2]]
 
  y = f*(1+epsi[,1])+epsi[,2]
  
  return(list(y=y,poped.db=poped.db)) 
}

Create a PopED database

We create a poped database to link the model defined above with a set of model parameters, the initial design and design space for optimization.

In this example, the parameter values are defined for the fixed effects (bpop), the between-subject variability variances (d) and the residual variability variances (sigma). We also fix the parameter Favail using notfixed_bpop, since we have only oral dosing and the parameter is not identifiable. Fixing a parameter means that we assume the parameter will not be estimated (and is know without uncertainty). In addition, we fix the small additive RUV term, as this term is reflecting the higher error expected at low concentration measurements (limit of quantification measurements) and would typically be calculated from analytical assay methods (for example, the standard deviation of the parameter might be 20% of the limit of quantification).

For the initial design, we define two groups (m=2) of 20 individuals (groupsize=20), with doses of 20 mg or 40 mg every 24 hours (a). The initial design has 5 sample times per individual (xt).

For the design space, which can be searched during optimization, we define a potential dose range of between 0 and 200 mg (mina and maxa), and a range of potential sample times between 0 and 10 hours for the first three samples and between 240 and 248 hours for the last two samples (minxt and maxxt). Finally, we fix the two groups of subjects to have the same sample times (bUseGrouped_xt=TRUE).

poped.db <- create.poped.database(
  # Model
  ff_fun=ff,
  fg_fun=sfg,
  fError_fun=feps,
  bpop=c(V=72.8,KA=0.25,CL=3.75,Favail=0.9), 
  notfixed_bpop=c(1,1,1,0),
  d=c(V=0.09,KA=0.09,CL=0.25^2), 
  sigma=c(prop=0.04,add=5e-6),
  notfixed_sigma=c(1,0),
  
  # Design
  m=2,
  groupsize=20,
  a=list(c(DOSE=20,TAU=24),c(DOSE=40, TAU=24)),
  maxa=c(DOSE=200,TAU=24),
  mina=c(DOSE=0,TAU=24),
  xt=c( 1,2,8,240,245),
  
  # Design space
  minxt=c(0,0,0,240,240),
  maxxt=c(10,10,10,248,248),
  bUseGrouped_xt=TRUE)

Design simulation

First it may make sense to check your model and design to make sure you get what you expect when simulating data. Here we plot the model typical values:

plot_model_prediction(poped.db, model_num_points = 300)

Next, we plot the expected prediction interval (by default a 95% PI) of the data taking into account the BSV and RUV using the option PI=TRUE. This option makes predictions based on first-order approximations to the model variance and a normality assumption of that variance. Better (and slower) computations are possible with the DV=T, IPRED=T and groupsize_sim = some large number options.

plot_model_prediction(poped.db, 
                      PI=TRUE, 
                      separate.groups=T, 
                      model_num_points = 300, 
                      sample.times = FALSE)

We can get these predictions numerically as well:

dat <- model_prediction(poped.db,DV=TRUE)
head(dat,n=5);tail(dat,n=5)
#>   ID Time         DV      IPRED       PRED Group Model DOSE TAU
#> 1  1    1 0.09659927 0.08034839 0.05325024     1     1   20  24
#> 2  1    2 0.13172074 0.13415072 0.09204804     1     1   20  24
#> 3  1    8 0.19502544 0.19134279 0.16409609     1     1   20  24
#> 4  1  240 0.04847782 0.05881203 0.12671376     1     1   20  24
#> 5  1  245 0.29770447 0.23457544 0.24980320     1     1   20  24
#>     ID Time         DV     IPRED      PRED Group Model DOSE TAU
#> 196 40    1 0.04411438 0.0583122 0.1065005     2     1   40  24
#> 197 40    2 0.10599655 0.1039377 0.1840961     2     1   40  24
#> 198 40    8 0.20262746 0.2206604 0.3281922     2     1   40  24
#> 199 40  240 0.17506051 0.3788561 0.2534275     2     1   40  24
#> 200 40  245 0.56558539 0.5183551 0.4996064     2     1   40  24

Design evaluation

Next, we evaluate the initial design

(ds1 <- evaluate_design(poped.db))
#> $ofv
#> [1] 39.309
#> 
#> $fim
#>                    V          KA           CL        d_V       d_KA        d_CL
#> V         0.05336692   -8.683963  -0.05863412   0.000000   0.000000    0.000000
#> KA       -8.68396266 2999.851007 -14.43058560   0.000000   0.000000    0.000000
#> CL       -0.05863412  -14.430586  37.15243290   0.000000   0.000000    0.000000
#> d_V       0.00000000    0.000000   0.00000000 999.953587 312.240246    3.202847
#> d_KA      0.00000000    0.000000   0.00000000 312.240246 439.412556    2.287838
#> d_CL      0.00000000    0.000000   0.00000000   3.202847   2.287838 3412.005199
#> sig_prop  0.00000000    0.000000   0.00000000 575.347261 638.581909 1182.325475
#>            sig_prop
#> V            0.0000
#> KA           0.0000
#> CL           0.0000
#> d_V        575.3473
#> d_KA       638.5819
#> d_CL      1182.3255
#> sig_prop 33864.3226
#> 
#> $rse
#>         V        KA        CL       d_V      d_KA      d_CL  sig_prop 
#>  8.215338 10.090955  4.400304 39.844763 60.655110 27.562541 13.865357

We see that the fixed-effect and residual variability parameters are relatively well estimated with this design, but the between-subject variability parameters are less well estimated.

Evaluate alternative design

What about an alternative design with sparse sampling? For example, what if each individual only has 3 time points at 1, 2 and 245 hours:

poped.db.new <- create.poped.database(
  # Model
  ff_fun=ff,
  fg_fun=sfg,
  fError_fun=feps,
  bpop=c(V=72.8,KA=0.25,CL=3.75,Favail=0.9), 
  notfixed_bpop=c(1,1,1,0),
  d=c(V=0.09,KA=0.09,CL=0.25^2), 
  sigma=c(prop=0.04,add=5e-6),
  notfixed_sigma=c(1,0),
  
  # Design
  m=2,
  groupsize=20,
  a=list(c(DOSE=20,TAU=24),c(DOSE=40, TAU=24)),
  maxa=c(DOSE=200,TAU=24),
  mina=c(DOSE=0,TAU=24),
  xt=c( 1,2,245),
                                      
  # Design space
  minxt=c(0,0,240),
  maxxt=c(10,10,248),
  bUseGrouped_xt=TRUE)
(ds2 <- evaluate_design(poped.db.new))
#> $ofv
#> [1] 29.66484
#> 
#> $fim
#>                     V         KA           CL        d_V       d_KA        d_CL
#> V          0.04243232  -10.51432   0.05782431   0.000000   0.000000    0.000000
#> KA       -10.51432135 2666.25466 -14.66678102   0.000000   0.000000    0.000000
#> CL         0.05782431  -14.66678  21.59743298   0.000000   0.000000    0.000000
#> d_V        0.00000000    0.00000   0.00000000 632.163776 457.737062    3.115099
#> d_KA       0.00000000    0.00000   0.00000000 457.737062 347.115999    2.363458
#> d_CL       0.00000000    0.00000   0.00000000   3.115099   2.363458 1153.026981
#> sig_prop   0.00000000    0.00000   0.00000000 348.477101 262.369792 1979.231386
#>            sig_prop
#> V            0.0000
#> KA           0.0000
#> CL           0.0000
#> d_V        348.4771
#> d_KA       262.3698
#> d_CL      1979.2314
#> sig_prop 15617.8185
#> 
#> $rse
#>          V         KA         CL        d_V       d_KA       d_CL   sig_prop 
#>  44.120338  51.256239   5.748842 207.941540 280.689945  53.350716  22.795275

Comparison of designs

The precision on CL is similar with the alternative design but the other parameters are less well estimated.

(design_eval <- round(data.frame("Design 1"=ds1$rse,"Design 2"=ds2$rse)))
Design.1 Design.2
V 8 44
KA 10 51
CL 4 6
d_V 40 208
d_KA 61 281
d_CL 28 53
sig_prop 14 23

Comparing the objective function value (OFV), we see that the alternative design (less samples per subject) has a smaller OFV (=worse). We can compare the two OFVs using efficiency, which tells us the proportion extra individuals that are needed in the alternative design to have the same information content as the original design (around 4 times more individuals than are currently in the design).

efficiency(ds2$ofv,ds1$ofv,poped.db)
#> [1] 3.965919
#> attr(,"description")
#> [1] "(exp(ofv_final) / exp(ofv_init))^(1/n_parameters)"

Design optimization

Now we can optimize the sample times of the original design by maximizing the OFV1.

output <- poped_optim(poped.db, opt_xt=TRUE)
summary(output)
#> ===============================================================================
#> FINAL RESULTS
#> Optimized Sampling Schedule
#> Group 1: 0.4574     10     10    240  240.9
#> Group 2: 0.4574     10     10    240  240.9
#> 
#> OFV = 40.5277
#> 
#> Efficiency: 
#>   ((exp(ofv_final) / exp(ofv_init))^(1/n_parameters)) = 1.1902
#> 
#> Expected relative standard error
#> (%RSE, rounded to nearest integer):
#>    Parameter   Values   RSE_0   RSE
#>            V     72.8       8     6
#>           KA     0.25      10     8
#>           CL     3.75       4     4
#>          d_V     0.09      40    33
#>         d_KA     0.09      61    50
#>         d_CL   0.0625      28    26
#>     sig_prop     0.04      14    15
#> 
#> Total running time: 8.484 seconds
plot_model_prediction(output$poped.db)

We see that there are four distinct sample times for this design. This means that for this model, with these exact parameter values, that the most information from the study to inform the parameter estimation is with these sample times.

Examine efficiency of sampling windows

Of course, this means that there are multiple samples at some of these time points. We can explore a more practical design by looking at the loss of efficiency if we spread out sample times in a uniform distribution around these optimal points (\(\pm 30\) minutes).

plot_efficiency_of_windows(output$poped.db,xt_windows=0.5)

Here we see the efficiency (\((|FIM_{optimized}|/|FIM_{initial}|)^{1/npar}\)) drops below 80% in some cases, which is mostly caused by an increase in the parameter uncertainty of the BSV parameter on absorption (om_KA). Smaller windows or different windowing on different samples might be needed. To investigate see ?plot_efficiency_of_windows.

Optimize over a discrete design space

In the previous example we optimized over a continuous design space (sample times could be optimized to be any value between a lower and an upper limit). We could also limit the search to only “allowed” values, for example, only samples taken on the hour are allowed.

poped.db.discrete <- create.poped.database(poped.db,discrete_xt = list(c(0:10,240:248)))
                                          
output_discrete <- poped_optim(poped.db.discrete, opt_xt=TRUE)
summary(output_discrete)
#> ===============================================================================
#> FINAL RESULTS
#> Optimized Sampling Schedule
#> Group 1:      1     10     10    240    241
#> Group 2:      1     10     10    240    241
#> 
#> OFV = 40.3782
#> 
#> Efficiency: 
#>   ((exp(ofv_final) / exp(ofv_init))^(1/n_parameters)) = 1.165
#> 
#> Expected relative standard error
#> (%RSE, rounded to nearest integer):
#>    Parameter   Values   RSE_0   RSE
#>            V     72.8       8     6
#>           KA     0.25      10     8
#>           CL     3.75       4     4
#>          d_V     0.09      40    32
#>         d_KA     0.09      61    53
#>         d_CL   0.0625      28    27
#>     sig_prop     0.04      14    15
#> 
#> Total running time: 5.051 seconds
plot_model_prediction(output_discrete$poped.db, model_num_points = 300)

Here we see that the optimization ran somewhat quicker, but gave a less efficient design.

Optimize ‘Other’ design variables

One could also optimize over dose, to see if a different dose could help in parameter estimation .

output_dose_opt <- poped_optim(output$poped.db, opt_xt=TRUE, opt_a=TRUE)

In this case the results are predictable … higher doses give observations with somewhat lower absolute residual variability leading to both groups at the highest allowed dose levels (200 mg in this case).

Cost function to optimize dose

Optimizing the dose of a study just to have better model parameter estimates may be somewhat implausible. Instead, let’s use a cost function to optimize dose based on some sort of target concentration … perhaps typical population trough concentrations of 0.2 and 0.35 for the two groups of patients at 240 hours.

First we define the criteria we use to optimize the doses, here a least squares minimization.

crit_fcn <- function(poped.db,...){
  pred_df <- model_prediction(poped.db)
  sum((pred_df[pred_df["Time"]==240,"PRED"] - c(0.2,0.35))^2)
}
crit_fcn(output$poped.db)
#> [1] 0.01469712

Now we minimize the cost function

output_cost <- poped_optim(poped.db, opt_a = TRUE, opt_xt = FALSE,
                     ofv_fun=crit_fcn, 
                     maximize = FALSE)
summary(output_cost)
#> ===============================================================================
#> FINAL RESULTS
#> 
#> Optimized Covariates:
#> Group 1: 31.5672 : 24
#> Group 2: 55.2426 : 24
#> 
#> OFV = 6.09293e-15
#> 
#> Efficiency: 
#>   (ofv_final / ofv_init) = 4.1457e-13
#> 
#> Expected relative standard error
#> (%RSE, rounded to nearest integer):
#>    Parameter   Values   RSE_0   RSE
#>            V     72.8       8     8
#>           KA     0.25      10    10
#>           CL     3.75       4     4
#>          d_V     0.09      40    40
#>         d_KA     0.09      61    60
#>         d_CL   0.0625      28    28
#>     sig_prop     0.04      14    14
#> 
#> Total running time: 1.467 seconds

We see that the optimal doses are 31.6 and 55.2 for the two groups. This leads to population trough concentrations of 0.2 and 0.35 for the two groups of patients at 240 hours:

library(ggplot2)
plot_model_prediction(output_cost$poped.db, model_num_points = 300)+
  coord_cartesian(xlim=c(230,250))


  1. Tip: to make the optimization run faster use the option parallel = TRUE in the poped_optim command.↩︎