Short: Amiga as an infrared remote control Author: indy@abs.gun.de (M. Watzl & J. Frank) Uploader: indy abs gun de (Michael Watzl) Type: util/misc Architecture: m68k-amigaos ------ english -------------------------------------------- The IR-Master package consists of two software parts and a control hardware which is plugged to the joystickport of your Amiga. With this equipment almost any device shipped with an IR remote can be controlled by your Amiga. At first you edit a virtual IR remote with the IR-Editor. Then this project is saved to disk an launched with the IR-Runner. The number of active IR-Runners is not limited. You can use the IR-Runner either interactively or control it via ARexx from other applications or even programm it using ARexx scripts. There are also some optional (send-only) hardwares: One is connected to the (internal) parallel port of the Amiga and carries up to eight IR senders. This eight channels can be selectively used by the IR-Master. Another optional hardware is designed for the audio-port. Here, the sending of IR commands uses DMA with the advantage not to block the system for a moment. With IR-Master 3.20 a new hardware for the (internal) serial port of the Amiga is introduced. LControl and other applications to control video cameras and players are supported directly since version 2.5 of the IR-Master. With version 3.33 the datatypes of AmigaOS 3.0 are supported. ------ deutsch --------------------------------------------- Das IR-Master-Paket besteht aus zwei Software-Komponenten und einer Steuerhardware, die an den Joystickport angeschlossen wird. Damit kann annähernd jedes Gerät, das mit einer InfraRot-Fernbedienung ausgerüstet ist, über den Amiga gesteuert werden. Zunächst wird mit dem IR-Editor eine "virtuelle" Fernbedienung erstellt. Diese wird dann abgespeichert und mit dem IR-Runner gestartet. Es können beliebig viele IR-Runner gleichzeitig laufen. Den IR-Runner können Sie dann entweder interaktiv benutzen, über ARexx von andern Programmen aus steuern oder über Skripts programmieren. Optional zu der Steuerhardware am Joystickport gibt es noch eine Hardware am Parallelport, die bis zu 8 Sendeeinheiten ansteuern kann. Die 8 Kanäle und die Masterhardware am Joystickport können vom IR-Master aus getrennt oder beliebig gemischt angesteuert werden. Neu ist auch die optionale Ausgabehardware am Audio-Ausgang des Amiga. Die Ausgabe wird mit Hilfe von DMA realisiert, wodurch kein lästiges Zucken des Mauszeigers beim Senden erfolgt. Ab der Version 3.20 ist auch eine Ausgabe am (internen) seriellen Port des Amiga möglich. LControl und andere spezielle Programme zum steuern von Videokameras werden ab der Version 2.5 des IR-Masters direkt unterstützt. Ab der Version 3.30 werden Datatypes (AmigaOS 3.0 vorausgesetzt) unterstützt.