************************************************************************** Security Bulletin 9227 DISA Defense Communications System December 11, 1992 Published by: DDN Security Coordination Center (SCC@NIC.DDN.MIL) 1-(800) 365-3642 DEFENSE DATA NETWORK SECURITY BULLETIN The DDN SECURITY BULLETIN is distributed by the DDN SCC (Security Coordination Center) under DISA contract as a means of communicating information on network and host security exposures, fixes, and concerns to security and management personnel at DDN facilities. Back issues may be obtained via FTP (or Kermit) from NIC.DDN.MIL [192.112.36.5] using login="anonymous" and password="guest". The bulletin pathname is scc/ddn-security-yynn (where "yy" is the year the bulletin is issued and "nn" is a bulletin number, e.g. scc/ddn-security-9227). ************************************************************************** + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + ! ! ! The following important advisory was issued by the Computer ! ! Emergency Response Team (CERT) and is being relayed unedited ! ! via the Defense Information Systems Agency's Security ! ! Coordination Center distribution system as a means of ! ! providing DDN subscribers with useful security information. ! ! ! + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + CA-92:20 CERT Advisory December 10, 1992 Cisco Access List Vulnerability ----------------------------------------------------------------------------- The CERT Coordination Center has received information concerning a vulnerability with Cisco routers when access lists are utilized. This vulnerability is present in Cisco software releases 8.2, 8.3, 9.0 and 9.1. Cisco Systems and CERT strongly recommend that sites using Cisco routers for firewalls take immediate action to eliminate this vulnerability from their networks. This vulnerability is fixed in Cisco software releases 8.3 (update 5.10), 9.0 (update 2.5), 9.1 (update 1.1) and in all later releases. Customers who are using software release 8.2 and do not want to upgrade to a later release should contact Cisco's Technical Assistance Center (TAC) at 800-553-2447 (Internet: tac@cisco.com) for more information. The following interim releases are available via anonymous FTP from ftp.cisco.com (131.108.1.111). Note: this FTP server will not allow filenames to be listed or matched with wildcards. Also, you cannot request the file by its full pathname. You must first cd to the desired directory (beta83_dir, beta90_dir, or beta91_dir) and then request the desired file (gs3-bfx.83-5.10, etc.). Release (Update) Filename Size Checksum 8.3 (5.10) /beta83_dir/gs3-bfx.83-5.10 1234696 02465 1206 9.0 (2.5) /beta90_dir/gs3-bfx.90-2.5 1705364 47092 1666 9.1 (1.1) /beta91_dir/gs3-k.91-1.1 2005548 59407 1959 For those customers having a maintenance contract, these releases are also available on Cisco's Customer Information On-Line (CIO) service. Other customers may obtain these releases through Cisco's Technical Assistance Center or by contacting their local Cisco distributor. ----------------------------------------------------------------------------- I. Description A vulnerability in Cisco access lists allows some packets that one would expect to be filtered by the access list to be erroneously routed and vice-versa. This vulnerability can allow unauthorized traffic to pass through the gateway and can block authorized traffic. II. Problem If a Cisco router is configured to use extended IP access lists for traffic filtering on an MCI, SCI, cBus or cBusII interface, and the IP route cache is enabled, and the "established" keyword is used in the access list, then the access list can be improperly evaluated. This can permit packets that should be filtered and filter packets that should be permitted. III. Workaround This vulnerability can be avoided by either rewriting the extended access list to eliminate the "established" keyword, or by configuring the interface to eliminate the IP route cache. To disable the IP route cache, use the configuration command "no ip route-cache". Example for a serial interface: router>enable Password: router#configure terminal Enter configuration commands, one per line. Edit with DELETE, CTRL/W, and CTRL/U; end with CTRL/Z interface serial 0 no ip route-cache ^Z router#write memory IV. Solution Obtain and install the appropriate interim release listed above. Sites that are not experienced with this installation process should contact the TAC center at 800-553-2447 for assistance. --------------------------------------------------------------------------- The CERT Coordination Center wishes to thank Keith Reynolds of the Santa Cruz Operation for his assistance in identifying this problem and Cisco Systems for their assistance in providing technical information for this advisory. --------------------------------------------------------------------------- If you believe that your system has been compromised, contact the CERT Coordination Center or your representative in FIRST (Forum of Incident Response and Security Teams). Internet E-mail: cert@cert.org Telephone: 412-268-7090 (24-hour hotline) CERT personnel answer 7:30 a.m.-6:00 p.m. EST(GMT-5)/EDT(GMT-4), on call during other hours for emergencies. CERT Coordination Center Software Engineering Institute Carnegie Mellon University Pittsburgh, PA 15213-3890 Past advisories, information about FIRST representatives, and other information related to computer security are available for anonymous FTP from cert.org (192.88.209.5). **************************************************************************** * * * The point of contact for MILNET security-related incidents is the * * Security Coordination Center (SCC). * * * * E-mail address: SCC@NIC.DDN.MIL * * * * Telephone: 1-(800)-365-3642 * * * * NIC Help Desk personnel are available from 7:00 a.m.-7:00 p.m. EST, * * Monday through Friday except on federal holidays. * * * ****************************************************************************