[ Top | Up | Prev | Next | Map | Index ]

Analog 5.03: Starting to use analog on other platforms


Here is the really short summary:
  1. Edit anlghead.h and compile, if necessary
  2. Edit analog.cfg
  3. Run analog

Many platforms have a precompiled version of analog available. Before compiling analog, have a look at the analog home page to see if yours does.

If you're not using one of the platforms for which a precompiled version is available, you'll have to compile your own version from the source. But don't worry -- it's written in standard C throughout, so it will compile out of the box on most platforms. (The source code is the same for all platforms.)

First, change to the src/ directory.

Then look at the file anlghead.h, and see if there's anything you want to edit.

When you have done that, you need to compile the program. How to do that depends on which operating system you're using.


Compiling under Unix. First edit anlghead.h as described above. Then just type
make
within the src/ directory to compile the program. On most systems, that will be sufficient, and the compiled program should appear in the parent directory. If it fails to compile, have a look in the Makefile to see if there's anything that you need to change to suit your configuration, and try again. It says in that file what to do. In particular, Solaris 2 (SunOS 5) users need to change the LIBS= line.

(Experts can pass some arguments in on the make command line instead of by editing anlghead.h: e.g.

make DEFS='-DLANGDIR=\"/usr/etc/apache/analog/lang/\"'
This is useful if you have a script to compile analog.)

If you haven't got gcc, you will need to change the compiler - try acc or cc instead. If it still doesn't compile, try DEFS=-DNODNS to ignore the DNS lookup code.

There is a known problem with HP-UX 10 and some versions of gcc. If it complains about an error in the <sys/stat.h> library, you need to upgrade to gcc version 2.7.2.3 or later, or use HP's cc compiler. HP's compiler is not an ANSI C compiler by default, so you need to specify -Ae in the CFLAGS to tell the compiler to use ANSI C.

SunOS 4's cc and gcc don't have the necessary header files for ANSI C. If you have the ANSI C compiler acc, use that. Otherwise use the DEFS given in the Makefile.

SunOS 5 users need to change the LIBS= line in the Makefile. Also, this OS sometimes seems to have a broken strcmp() function. If you get an "illegal instruction" error when running analog, compile it with the -DNEED_STRCMP in the DEFS= line.

Compiling under OpenVMS. First edit anlghead.h as described above. Move to the [.analog5_0.src] directory. To build Analog interactively from the command line, type

$ @ Build_Analog
or to submit the Build_Analog procedure to a batch queue, type
$ Submit /NoPrint /Keep Batch.com
The command procedure will use MMS (or MMK) if it is available, otherwise it will compile everything from raw command procedures.

Compiling under Acorn RiscOS. The Makefile is called Make.Risc, and you will have to rename it to Makefile before running make. Also you have to make directories called C, H and O, and move the sources files into the appropriate directories: e.g., alias.c must be renamed C.alias. And you will find that there are some filenames in the header file anlghead.h that you want to change to fit into the RiscOS directory structure.

Compiling under OS/2. To compile analog for OS/2, you will need the EMX package. You should edit the Makefile to have OS=OS2 and LIBS=-lsocket. Then after editing anlghead.h and running Make, you need to run the command

EMXBIND -b ANALOG
to generate the analog.exe executable.
After you've compiled the program, leave the src/ directory and then just type
analog
to run the program. (Or ./analog if for some reason . isn't in your $PATH.)

You can configure analog by putting commands in the configuration file, which is called analog.cfg by default. Two commands you will need straight away are

LOGFILE logfilename      # to set where your logfile lives
OUTFILE outputfile.html  # to send the output to a file instead of the screen
The logfile must be stored locally -- analog won't use FTP or HTTP to fetch it from the internet. There's a sample logfile supplied with the program.

There's a list of basic commands later in the Readme. Also there are a few to get you started in the configuration file already, but there are lots of others available. You can read about all the commands in the section on customising analog. For help in interpreting the output, see What the results mean.

There is one other way to give options to analog, via command line arguments, given on the command line after the program name. These are just shortcuts for configuration file commands.


Go to the analog home page.

Stephen Turner
07 July 2001

Need help with analog? Use the analog-help mailing list.

[ Top | Up | Prev | Next | Map | Index ]